Numéro de référence
ISO 21013-3:2006
ISO 21013-3:2006
Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 3: Détermination de la taille et du volume
Edition 1
2006-01
Annulée
ISO 21013-3:2006
36741
Annulée (Edition 1, 2006)

Résumé

ISO 21013-3:2006 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions.

  • Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure.
  • Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; pressure regulator of the pressure build-up system functioning at full potential.
  • Vacuum-insulated vessels with insulation system remaining in place but with loss of vacuum, or non-vacuum-insulated vessels with insulation system intact; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; vacuum or non-vacuum-insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum-insulated vessels, and fire engulfment; inner vessel at temperature of the contents at the relieving pressure.
  • Vessels with insulation system totally lost and fire engulfment.

Good engineering practice based on well-established theoretical physical science needs to be adopted to determine the required mass flow where an appropriate calculation method is not provided for an applicable condition.

Informations générales

  •  : Annulée
     : 2006-01
    : Annulation de la Norme internationale [95.99]
  •  : 1
  • ISO/TC 220
    23.020.40 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance