Reference number
ISO/IEC 18000-6:2013
International Standard
ISO/IEC 18000-6:2013
Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General
Edition 3
2013-01
Preview
ISO/IEC 18000-6:2013
59644
Indisponible en français
Publiée (Edition 3, 2013)
Cette publication a été révisée et confirmée pour la dernière fois en 2018. Cette édition reste donc d’actualité.

ISO/IEC 18000-6:2013

ISO/IEC 18000-6:2013
59644
Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Résumé

ISO/IEC 18000-6:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards.

It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.

ISO/IEC 18000-6:2013 together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) or tag-only-talks-after-listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator, or TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not.

ISO/IEC 18000-6:2013 contains one mode with four types. The detailed technical differences between the four types are shown in the associated parameter tables.

Types A, B and C are ITF. Type A uses Pulse-Interval Encoding (PIE) in the forward link and an adaptive ALOHA collision-arbitration algorithm. Type B uses Manchester in the forward link and an adaptive binary-tree collision-arbitration algorithm. Type C uses PIE in the forward link and a random slotted collision-arbitration algorithm.

Type D is TOTAL based on Pulse Position Encoding or Miller M=2 encoded subcarrier.

Informations générales

  •  : Publiée
     : 2013-01
    : Norme internationale à réviser [90.92]
  •  : 3
  • ISO/IEC JTC 1/SC 31
    35.040.50 
  • RSS mises à jour

Prochaine édition en cours d'élaboration

Draft
International Standard
ISO/IEC DIS 18000-6
Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets — Partie 6: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Général
Reference number
ISO/IEC DIS 18000-6
Edition 1
Projet Norme internationale

ISO/IEC DIS 18000-6

Technologies de l'information — Identification par radiofréquence (RFID) pour la gestion d'objets

Partie 6: Paramètres de communications d'une interface radio entre 860 MHz et 960 MHz, Général

ISO/IEC DIS 18000-6

ISO/IEC DIS 18000-6
88535
Langue
Format
CHF 63
Convertir les francs suisses (CHF) dans une autre devise

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance