Фильтр :
Стандарт и/или проект Этап ТК
Reduction sleeves and extension sockets for tools with Morse taper shanks
95.99 ISO/TC 29
Reduction sleeves and extension sockets for tools with Morse taper shanks
90.60 ISO/TC 29/SC 9
Machine tools — Self-holding tapers for tool shanks
95.99 ISO/TC 39
Machine tools — Self-holding tapers for tool shanks
90.93 ISO/TC 29/SC 9
7/24 tapers for tool shanks for manual changing
95.99 ISO/TC 39
7/24 tapers for tool shanks for manual changing
90.60 ISO/TC 29/SC 9
Machine tool tables — T-slots and corresponding bolts
95.99 ISO/TC 39
Machine tool tables — T-slots and corresponding bolts
90.20 ISO/TC 39
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
95.99 ISO/TC 39
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
95.99 ISO/TC 39/SC 8
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
90.93 ISO/TC 39/SC 8
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type
95.99 ISO/TC 39/SC 8
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type
90.93 ISO/TC 39/SC 8
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type — Technical Corrigendum 1
60.60 ISO/TC 39/SC 8
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type
95.99 ISO/TC 39/SC 8
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type
90.93 ISO/TC 39/SC 8
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connection
90.93 ISO/TC 39/SC 8
Milling machine arbors with 7/24 tapers — Part 1: Dimensions
95.99 ISO/TC 29
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
90.93 ISO/TC 29/SC 9
Milling machine arbors with 7/24 tapers — Part 2: Accessories
90.93 ISO/TC 29/SC 9
Machine tools — Morse taper shanks — Cotter slots with taper keys
90.60 ISO/TC 29/SC 9
Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)
95.99 ISO/TC 39/SC 8
Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests)
95.99 ISO/TC 39/SC 8
Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
90.93 ISO/TC 39/SC 8
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws
90.93 ISO/TC 39/SC 8
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jaws
90.93 ISO/TC 39/SC 8
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws
90.93 ISO/TC 39/SC 8
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
95.99 ISO/TC 39
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
95.99 ISO/TC 39/SC 8
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
95.99 ISO/TC 29
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
90.93 ISO/TC 29/SC 9
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
90.93 ISO/TC 29/SC 9
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
90.93 ISO/TC 29/SC 9
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
Cutter arbors with tenon drive — Dimensions
95.99 ISO/TC 29
Cutter arbors with tenon drive — Dimensions
95.99 ISO/TC 29
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
95.99 ISO/TC 29
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
90.60 ISO/TC 29/SC 9
Counterbores with Morse taper shanks and detachable pilots
95.99 ISO/TC 29/SC 9
Counterbores with Morse taper shanks and detachable pilots
90.60 ISO/TC 29/SC 9
Jig bushes and accessories for drilling purposes — Dimensions
95.99 ISO/TC 29
Jig bushes — Definitions and nomenclature
90.93 ISO/TC 29/SC 9
Machine tools — Positive drive of Morse tapers
95.99 ISO/TC 29
Machine tools — Positive drive of Morse tapers
90.93 ISO/TC 29/SC 9
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99 ISO/TC 29
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99 ISO/TC 29
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
90.93 ISO/TC 29/SC 9
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks
95.99 ISO/TC 29
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
90.93 ISO/TC 29/SC 9
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
95.99 ISO/TC 29
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
90.60 ISO/TC 29/SC 9
Tapered polygonal interface with flat contact surface — Part 1: Tool shanks type F, H, A; Dimensions and versions
30.60 ISO/TC 29/SC 9
Tapered polygonal interface with flat contact surface — Part 2: Tool receivers type F, H, A, X-- Dimensions and versions
30.60 ISO/TC 29/SC 9
Tapered polygonal interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A
30.60 ISO/TC 29/SC 9
Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
95.99 ISO/TC 39
Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy
90.93 ISO/TC 39/SC 2
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
95.99 ISO/TC 29/SC 9
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances
95.99 ISO/TC 29
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
90.93 ISO/TC 29/SC 9
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
95.99 ISO/TC 29/SC 9
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
90.60 ISO/TC 29/SC 9
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99 ISO/TC 29/SC 9
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99 ISO/TC 29
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
90.60 ISO/TC 29/SC 9
Conditions of acceptance and installation for work-holding fixed tables of machine tools
95.99 ISO/TC 39/SC 2
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
90.93 ISO/TC 29/SC 9
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
90.93 ISO/TC 29/SC 9
7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses
95.99 ISO/TC 29
Machine tools — Jaw mountings on power chucks
95.99 ISO/TC 39/SC 8
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
95.99 ISO/TC 29
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
90.93 ISO/TC 29/SC 9
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
95.99 ISO/TC 29
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
95.99 ISO/TC 29
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
90.93 ISO/TC 29/SC 9
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
95.99 ISO/TC 29
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
90.93 ISO/TC 29/SC 9
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99 ISO/TC 29
Tool holders with cylindrical shank — Part 7: Type F with taper seat
90.93 ISO/TC 29/SC 9
Tool holders with cylindrical shank — Part 8: Type Z, accessories
90.93 ISO/TC 29/SC 9
Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts
95.99 ISO/TC 29
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
90.60 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
90.92 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
40.99 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
90.92 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 2: Receivers of type A, C and E for hollow taper shanks of type A, AB, C, CB and EB
40.99 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
95.99 ISO/TC 29
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
90.92 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 3: Shanks of type T, TA and U
40.99 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
95.99 ISO/TC 29
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
90.92 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 4: Receivers of type T and U for hollow taper shanks of type T, TA and U
40.99 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 5: Shanks of type AS, CS and ES
40.99 ISO/TC 29/SC 9
Hollow taper interface with flange contact surface — Part 6: Receivers of type AS, CS and ES for hollow taper shanks of type AS, CS and ES
40.99 ISO/TC 29/SC 9
Code of practice for the safe operation of work-holding chucks used on lathes
95.99 ISO/TC 39/SC 8
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
95.99 ISO/TC 29
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
90.93 ISO/TC 29/SC 9
Machine tools — Work holding chucks — Vocabulary
90.93 ISO/TC 39/SC 8
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
60.60 ISO/TC 29/SC 9
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
60.60 ISO/TC 29/SC 9
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
95.99 ISO/TC 29
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
90.93 ISO/TC 29
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
90.93 ISO/TC 29/SC 9
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
95.99 ISO/TC 29
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
95.99 ISO/TC 29/SC 9
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
60.60 ISO/TC 29/SC 9
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
95.99 ISO/TC 29
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
90.93 ISO/TC 29/SC 9

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.