Reference number
ISO 2507-1:1995
International Standard
ISO 2507-1:1995
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
Edition 1
1995-02
Preview
ISO 2507-1:1995
20854
недоступно на русском языке
Опубликовано (Версия 1, 1995)
Последний раз этот публикация был пересмотрен в  2017. Поэтому данная версия остается актуальной.

ISO 2507-1:1995

ISO 2507-1:1995
20854
Язык
Формат
CHF 43
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate. Is applicable only to thermoplastics materials for which it is possible to measure the temperature at which the rate of softening becomes rapid. Is based on ISO 306:1994 which, however, applies to materials in the form of sheets.

Общая информация

  •  : Опубликовано
     : 1995-02
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 1
  • ISO/TC 138/SC 5
  • RSS обновления

Новая версия в процессе разработки

Draft
International Standard
ISO/DIS 2507
Thermoplastics pipes and fittings — Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) pipes and fittings
Reference number
ISO/DIS 2507
Edition 1
Проект Международный стандарт

ISO/DIS 2507

Thermoplastics pipes and fittings — Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) pipes and fittings

Part 1: General test method

ISO/DIS 2507

ISO/DIS 2507
89067
Язык
Формат
CHF 65
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ