Reference number
ISO/TR 17243-2:2017
Technical Report
ISO/TR 17243-2:2017
Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
Edition 1
2017-08
Technical Report
Preview
ISO/TR 17243-2:2017
66432
недоступно на русском языке
Опубликовано (Версия 1, 2017)

ISO/TR 17243-2:2017

ISO/TR 17243-2:2017
66432
Язык
Формат
CHF 96
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO/TR 17243-2:2017 information on how to assess the severity of machine tool spindle vibrations measured on the spindle housing. It gives specific guidance for assessing the severity of vibration measured on the spindle housing at customer sites or at the machine tool manufacturer's test facilities.

Its vibration criteria apply to direct-driven spindles and belt-driven spindles intended for stationary machine tools with nominal operating speeds between 600 r/min and 30 000 r/min.

It is applicable to those spindles of the rolling element bearing types only, to spindles assembled on metal cutting machine tools, and for testing, periodic verification, and continuous monitoring.

It does not address

- geometrical accuracy of axes of rotation (see ISO 230‑7),

- unacceptable cutting performance with regards to surface finish and accuracy,

- vibration severity issues of machine tool spindles operating at speeds below 600 r/min or exceeding 30 000 r/min (due to lack of supporting vibration data and limitations in many vibration measurement instruments), or

- frequency domain analyses such as fast Fourier transform (FFT) analyses, envelope analyses or other similar techniques.

Annex A presents an introduction to alternative bearing condition assessment techniques.

Общая информация

  •  : Опубликовано
     : 2017-08
    : Опубликование международного стандарта [60.60]
  •  : 1
  • ISO/TC 39/SC 2
    25.080.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ