Reference number
ISO 12217-3:2022
International Standard
ISO 12217-3:2022
Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m
Edition 4
2022-12
Preview
ISO 12217-3:2022
79074
недоступно на русском языке
Опубликовано (Версия 4, 2022)

ISO 12217-3:2022

ISO 12217-3:2022
79074
Язык
Формат
CHF 194
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed.

The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load.

This document is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 can alternatively be assessed using ISO 122171 or ISO 122172 (for non-sailing and sailing boats, respectively), in which case higher design categories can be assigned.

In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation.

This document excludes:

    inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series;

    personal watercraft covered by ISO 13590 and other similar powered craft;

    aquatic toys;

    canoes and kayaks;

    gondolas and pedalos;

    sailing surfboards;

    surfboards, including powered surfboards;

    hydrofoils, foil stabilized boats and hovercraft when not operating in the displacement mode; and

    submersibles.

NOTE       Displacement mode means that the boat is only supported by hydrostatic forces.

It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Общая информация

  •  : Опубликовано
     : 2022-12
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 4
  • ISO/TC 188
    47.080 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ