Steel — Hardenability test by end quenching (Jominy test)

Steel — Hardenability test by end quenching (Jominy test)

Steel — Hardenability test by end quenching (Jominy test)

Steels — Micrographic determination of the ferritic or austenitic grain size

Steels — Micrographic determination of the apparent grain size

Steels — Micrographic determination of the apparent grain size

Steels — Micrographic determination of the apparent grain size

Steels — Micrographic determination of the apparent grain size

Steel — Determination and verification of the effective depth of carburized and hardened cases

Steels — Determination and verification of the depth of carburized and hardened cases

Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 1: Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)

Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 2: Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss test)

Steel — Determination of effective depth of hardening after flame or induction hardening

Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions

Steel, non-alloy and low-alloy — Determination of depth of decarburization

Steels — Determination of depth of decarburization

Steels — Determination of the depth of decarburization

Steels — Determination of the depth of decarburization

Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams

Steel — Determination of content of nonmetallic inclusions — Micrographic method using standard diagrams

Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams

Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams

Steel — Macrographic examination by sulfur print (Baumann method)

Steel — Macrographic examination by sulphur print (Baumann method)

Steel — Macroscopic examination by etching with strong mineral acids

Steel — Etching method for macroscopic examination

Steel — Determination of total or effective thickness of thin surface-hardened layers

Metallographical determination of ferrite in austenitic stainless steel

Steel — Rating and classifying nonmetallic inclusions using the scanning electron microscope

Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference photomicrographs

Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid

Steels — Point counting method for statistically estimating the volume fraction of a constituent with a point grid

Steel — Metallographic characterization of duplex grain size and distributions

Steel — Metallographic characterization of duplex grain size and distributions

Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels — Part 1: Constant load test

Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high-strength steels — Part 2: Slow strain rate test

Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels

Determination of percentage of resolvable pearlite in high carbon steel wire rod

Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm

Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm

Steel — Determination of the thickness of surface-hardened layers

Steel — Determination of the thickness of surface-hardened layers

Preparation of metallographic specimens

Evaluation of Centerline Segregation of Continuously Cast Slabs