Silicones, see 71.100.55
Filter :
Standard and/or project Stage TC
Plastics — Phenolic mouldings — Determination of acetone-soluble matter
95.99 ISO/TC 61/SC 12
Plastics — Determination of apparent density of material that can be poured from a specified funnel
90.92 ISO/TC 61/SC 12
Plastics — Determination of apparent density of material that can be poured from a specified funnel
40.20 ISO/TC 61/SC 12
Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
90.92 ISO/TC 61/SC 12
Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
40.00 ISO/TC 61/SC 12
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99 ISO/TC 61/SC 2
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
95.99 ISO/TC 61/SC 2
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
90.93 ISO/TC 61/SC 2
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
95.99 ISO/TC 61/SC 2
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
90.92 ISO/TC 61/SC 2
Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
90.93 ISO/TC 61/SC 12
Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
90.93 ISO/TC 61/SC 12
Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
90.93 ISO/TC 61/SC 12
Plastics — Compression moulding test specimens of thermosetting materials
95.99 ISO/TC 61/SC 12
Plastics — Compression moulding of test specimens of thermosetting materials
95.99 ISO/TC 61/SC 12
Plastics — Compression moulding of test specimens of thermosetting materials
90.93 ISO/TC 61/SC 12
Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
95.99 ISO/TC 61/SC 12
Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
90.93 ISO/TC 61/SC 12
Plastics — Phenolic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Phenolic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
90.93 ISO/TC 61/SC 9
Plastics — Aminoplastic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Aminoplastic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Determination of acid value
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value
95.99 ISO/TC 61/SC 12
Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value
90.93 ISO/TC 61/SC 12
Ebonite — Determination of tensile strength and elongation at break
95.99 ISO/TC 45/SC 2
Ebonite — Determination of cross-breaking strength
95.99 ISO/TC 45/SC 2
Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Determination of hydroxyl value
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Determination of hydroxyl value
90.93 ISO/TC 61/SC 12
Plastics — Thermosetting moulding materials — Determination of shrinkage
95.99 ISO/TC 61/SC 12
Plastics — Thermosetting moulding materials — Determination of shrinkage
90.93 ISO/TC 61/SC 12
Ebonite — Determination of hardness by means of a durometer
95.99 ISO/TC 45/SC 2
Plastics — Epoxide compounds — Determination of epoxide equivalent
95.99 ISO/TC 61/SC 12
Plastics — Epoxy compounds — Determination of epoxy equivalent
95.99 ISO/TC 61/SC 12
Plastics — Epoxy compounds — Determination of epoxy equivalent
90.93 ISO/TC 61/SC 12
Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage — Technical Corrigendum 1
60.60 ISO/TC 61/SC 12
Plastics — Aminoplastic moulding materials — Determination of volatile matter
90.92 ISO/TC 61/SC 12
Plastics — Aminoplastic moulding materials — Determination of volatile matter
40.00 ISO/TC 61/SC 12
Plastics — Unsaturated polyester resins — Part 1: Designation
95.99 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester resins (UP-R) — Part 1: Designation system
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Epoxide resins — Part 1: Designation
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Part 1: Designation
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
90.93 ISO/TC 61/SC 12
Thermosetting resin and UV curable resin — Determination of shrinkage by continuous measurement method
60.60 ISO/TC 61/SC 12
Plastics — Epoxide resins and glycidyl esters - Determination of inorganic chlorine (Under revision ISO 11376)
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins and related materials — Determination of easily saponifiable chlorine
95.99 ISO/TC 61/SC 12
Plastics — Hardeners and accelerators for epoxide resins — Part 1: Designation
95.99 ISO/TC 61/SC 12
Plastics — Hardeners and accelerators for epoxy resins — Part 1: Designation
90.93 ISO/TC 61/SC 12
Plastics — Melamine-formaldehyde mouldings — Determination of extractable formaldehyde
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated polyesters and epoxide resins — Determination of total chlorine content
90.93 ISO/TC 61/SC 12
Plastics — Liquid epoxide resins — Determination of tendency to crystallize
95.99 ISO/TC 61/SC 12
Plastics — Liquid epoxy resins — Determination of tendency to crystallize
95.99 ISO/TC 61/SC 12
Plastics — Liquid epoxy resins — Determination of tendency to crystallize
90.93 ISO/TC 61/SC 12
Plastics — Melamine/phenolic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Melamine/phenolic moulding materials — Specification
95.99 ISO/TC 61/SC 12
Plastics — Hardeners and accelerators for epoxide resins — Determination of free acid in acid anhydride
90.93 ISO/TC 61/SC 12
Plastics — Thermosetting moulding materials — Determination of transfer flow
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Basis for classification
95.99 ISO/TC 61/SC 12
Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter
95.99 ISO/TC 61/SC 12
Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resin powder — Sieve analysis using air-jet sieve apparatus
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of pH
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of hexamethylenetetramine content
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method, perchloric acid method and hydrochloric acid method
90.93 ISO/TC 61/SC 12
Plastics — Liquid phenolic resins — Determination of water miscibility
95.99 ISO/TC 61/SC 12
Plastics — Liquid phenolic resins — Determination of water miscibility
90.93 ISO/TC 61/SC 12
Plastics — Basic materials for polyurethanes — Pure isocyanates — Analysis of isocyanate groups
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins in the liquid state or in solution — Determination of viscosity
95.99 ISO/TC 61/SC 12
Plastics — Basic materials for polyurethanes — Determination of the amounts of 2,4- and 2,6-isomers in toluenediisocyanate by infrared spectroscopy
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of the gel time at a given temperature using automatic apparatus
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of the gel time of resols under specific conditions using automatic apparatus
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of free formaldehyde content
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of free-formaldehyde content — Hydroxylamine hydrochloride method
95.99 ISO/TC 61/SC 12
Plastics — Amine epoxide hardeners — Determination of primary, secondary and tertiary amine group nitrogen content
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of reactivity of resols under acid conditions
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of electrical conductivity of resin extracts — Technical Corrigendum 1
60.60 ISO/TC 61/SC 12
Plastics — Phenolic resins — Definitions and test methods
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Classification and test methods
90.93 ISO/TC 61/SC 12
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
90.93 ISO/TC 61/SC 12
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
90.93 ISO/TC 61/SC 12
Plastics — Thermosetting moulding materials — Injection moulding of multipurpose test specimens
95.99 ISO/TC 61/SC 12
Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins and glycidyl esters — Determination of inorganic chlorine
95.99 ISO/TC 61/SC 12
Plastics — Phenolic resins — Separation by liquid chromatography
90.93 ISO/TC 61/SC 12
Plastics — Condensation resins — Determination of free formaldehyde
95.99 ISO/TC 61/SC 12
Phenolic, amino and condensation resins — Determination of free-formaldehyde content
90.93 ISO/TC 61/SC 12
Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins and related materials — Determination of total saponifiable chlorine
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
60.60 ISO/TC 61/SC 12
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Melamine-formaldehyde powder moulding compounds (MF-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Melamine/phenolic powder moulding compounds (MP-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester powder moulding compounds (UP-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C
90.93 ISO/TC 61/SC 12
Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Indophenol method
90.93 ISO/TC 61/SC 12
Plastics — Polyurethane raw materials — Determination of isocyanate content
95.99 ISO/TC 61/SC 12
Plastics — Polyurethane raw materials — Determination of isocyanate content — Technical Corrigendum 1
95.99 ISO/TC 61/SC 12
Plastics — Polyurethane raw materials — Determination of isocyanate content
95.99 ISO/TC 61/SC 12
Plastics — Polyurethane raw materials — Determination of isocyanate content — Amendment 1: Acceptable variations in the procedure for method B
95.99 ISO/TC 61/SC 12
Plastics — Polyurethane raw materials — Determination of isocyanate content
90.93 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of water content
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of water content
90.92 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of water content
40.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity
90.93 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethane — Determination of acidity — Amendment 1
60.60 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of basicity
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity
60.60 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number — Technical Corrigendum 1
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
90.92 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
30.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine
95.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine
90.93 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy
90.93 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate
95.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate
95.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI)
90.93 ISO/TC 61/SC 12
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 1: Designation system and basis for specifications
90.93 ISO/TC 61/SC 12
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 2: Preparation of test specimens and determination of properties
90.93 ISO/TC 61/SC 12
Plastics — Epoxy powder moulding compounds (EP-PMCs) — Part 3: Requirements for selected moulding compounds
90.93 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration
90.92 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethane — Determination of degree of unsaturation by microtitration
40.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Test methods
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Test methods
90.93 ISO/TC 61/SC 12
Plastics — Determination of tensile properties at high strain rates
90.93 ISO/TC 61/SC 2
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
90.20 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of 1,2-glycol content
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of 1,2-glycol content
90.93 ISO/TC 61/SC 12
Plastics — Polymer polyols for use in the production of polyurethane — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography
60.60 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of electrical conductivity of aqueous resin extracts
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 1: Inorganic chlorine
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 2: Easily saponifiable chlorine
90.93 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine
95.99 ISO/TC 61/SC 12
Plastics — Epoxy resins — Determination of chlorine content — Part 3: Total chlorine
90.93 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen
95.99 ISO/TC 61/SC 12
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen
90.93 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine
95.99 ISO/TC 61/SC 12
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine
90.93 ISO/TC 61/SC 12

No matching records found. Please try changing the filter settings.