Filter :
Standard and/or project Stage TC
Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses for oil suction and discharge
95.99 ISO/TC 45/SC 1
Rubber hose and hose assemblies for oil suction and discharge service — Specification
90.93 ISO/TC 45/SC 1
Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions
95.99 ISO/TC 5
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
Rubber hose for liquefied petroleum gases (LPG)
95.99 ISO/TC 45
Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) — Bulk transfer applications — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification
60.60 ISO/TC 45/SC 1
Rubber hose for fuel truck delivery
95.99 ISO/TC 45/SC 1
Rubber hoses for bulk fuel truck delivery — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
60.60 ISO/TC 45/SC 1
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
95.99 ISO/TC 67
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
95.99 ISO/TC 67
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C
95.99 ISO/TC 67
Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Technical Corrigendum 1
95.99 ISO/TC 67
Oil and natural gas industries — Steel line pipe
95.99 ISO/TC 67
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems — Amendment 1
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
90.20 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service
60.60 ISO/TC 67
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General
30.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes
30.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
30.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
95.99 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
60.60 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
Loading and unloading of liquefied natural gas (LNG) tank wagons and containers
60.60 ISO/TC 67/SC 9
Rubber hoses — Measured fuel dispensing — Part 1: Conventional petroleum based fuels — Specification
95.99 ISO/TC 45/SC 1
Rubber hoses and hose assemblies for measured fuel dispensing — Specification
95.99 ISO/TC 45/SC 1
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification
90.93 ISO/TC 45/SC 1
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Terms and definitions
40.60 ISO/TC 67/SC 2
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material
95.99 ISO/TC 45/SC 4
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material
95.99 ISO/TC 45/SC 4
Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
95.99 ISO/TC 45/SC 1
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
90.93 ISO/TC 45/SC 1
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
90.93 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification
95.99 ISO/TC 138/SC 4
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
Road vehicles — Nozzle spouts for unleaded gasoline
90.93 ISO/TC 22/SC 34
Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel
90.93 ISO/TC 22/SC 34
Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications
95.99 ISO/TC 67/SC 4
Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing
90.93 ISO/TC 58/SC 4
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
95.99 ISO/TC 138/SC 4
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
95.99 ISO/TC 138/SC 4
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
60.60 ISO/TC 138/SC 4
Polyethylene (PE) valves for gas distribution systems
95.99 ISO/TC 138/SC 7
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
90.92 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
95.99 ISO/TC 138/SC 8
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
90.92 ISO/TC 138/SC 8
Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material
30.60 ISO/TC 138/SC 8
Crude petroleum and petroleum products — Bulk cargo transfer — Guidelines for achieving the fullness of pipelines
90.60 ISO/TC 28/SC 2
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification
90.93 ISO/TC 45/SC 1
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
90.92 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1
60.60 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
40.60 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
60.60 ISO/TC 138/SC 4
Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems
60.60 ISO/TC 67
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
90.60 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Requirements and guidance for pipeline life extension assessment
40.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension
90.92 ISO/TC 67/SC 2
Qualification of casing connections for thermal wells
95.99 ISO/TC 67/SC 5
Qualification of casing connections for thermal wells
60.60 ISO/TC 67/SC 5
Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles
90.93 ISO/TC 220
Petroleum and natural gas industries — Pipeline transportation systems
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems
90.92 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Procedures for testing casing and tubing connections
95.99 ISO/TC 67/SC 5
Petroleum and natural gas industries — Procedures for testing casing and tubing connections
90.60 ISO/TC 67/SC 5
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines — Technical Corrigendum 1
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
90.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
95.99 ISO/TC 67
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
95.99 ISO/TC 67
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment
90.93 ISO/TC 67
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
90.92 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves — Technical Corrigendum 1
60.60 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline valves
40.60 ISO/TC 67/SC 2
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines
90.93 ISO/TC 138/SC 4
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
90.60 ISO/TC 67/SC 6
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
90.92 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Subsea pipeline valves
40.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
95.99 ISO/TC 67/SC 2
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
90.92 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
40.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
95.99 ISO/TC 67/SC 2
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
95.99 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Factory bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 4: Factory cold bends
90.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Piping
90.60 ISO/TC 67/SC 6
Road vehicles — Blended fuels refuelling connector
90.93 ISO/TC 22/SC 41
Road vehicles — Blended fuels refuelling connector — Amendment 1
60.60 ISO/TC 22/SC 41
Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
90.92 ISO/TC 67/SC 2
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
90.92 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
60.00 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
95.99 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
90.92 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
40.60 ISO/TC 138/SC 7
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 7: Assessment of conformity
60.60 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators
60.60 ISO/TC 138/SC 4
Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods
90.92 ISO/TC 67/SC 2
Natural gas fuelling stations — CNG stations for fuelling vehicles
90.92 ISO/TC 340
Natural gas fuelling stations — CNG stations for fuelling vehicles
40.00 ISO/TC 340
Natural gas fuelling stations — LNG stations for fuelling vehicles
90.92 ISO/TC 340
Natural gas fuelling stations — LNG stations for fuelling vehicles
40.00 ISO/TC 340
Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks
95.99 ISO/TC 67
Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks
60.60 ISO/TC 67
Petroleum and natural gas industries — Guidelines for the marine interfaces of hybrid LNG terminals
90.93 ISO/TC 67/SC 9
Metal ball valves for petroleum, petrochemical and allied industries
95.99 ISO/TC 153
Metal ball valves for petroleum, petrochemical and allied industries
90.93 ISO/TC 153
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
95.99 ISO/TC 138/SC 4
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1
95.99 ISO/TC 138/SC 4
Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications
60.60 ISO/TC 138/SC 4
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
95.99 ISO/TC 138/SC 4
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
90.60 ISO/TC 138/SC 4
Guidelines for systems and installations for supply of LNG as fuel to ships
95.99 ISO/TC 67/SC 9
Guidelines for safety and risk assessment of LNG fuel bunkering operations
90.20 ISO/TC 67/SC 9
Petroleum, petrochemical and natural gas industries — Qualification testing and acceptance criteria for protective coating systems under insulation
90.93 ISO/TC 67
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 1: Full-life cycle integrity management for onshore pipeline
90.60 ISO/TC 67/SC 2
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 2: Full-life cycle integrity management for offshore pipeline
90.60 ISO/TC 67/SC 2
Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase
90.93 ISO/TC 67/SC 9
Determination of the resistance to cryogenic spill of insulation materials — Part 2: Vapour exposure
60.60 ISO/TC 67/SC 9
Determination of the resistance to cryogenic spillage of insulation materials — Part 3: Jet release
90.93 ISO/TC 67/SC 9
Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 1: General requirements
60.60 ISO/TC 67/SC 9
Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 2: Specific FSRU issues
60.60 ISO/TC 67/SC 9
Oil and gas industries including lower carbon energy — Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials
60.60 ISO/TC 67
Petroleum, petrochemical and natural gas industries — Production assurance and reliability management
95.99 ISO/TC 67
Petroleum, petrochemical and natural gas industries — Production assurance and reliability management
90.93 ISO/TC 67
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
95.99 ISO/TC 138/SC 4
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems
90.93 ISO/TC 138/SC 4
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1
60.60 ISO/TC 138/SC 4
Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors
90.93 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
90.92 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings — Technical Corrigendum 1
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
90.92 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
40.20 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
90.92 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1: Introduction of mesh-backed coating systems
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
90.92 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
40.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
95.99 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
90.92 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
40.00 ISO/TC 67/SC 2
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 11: Coatings for in-field application, coating repairs and rehabilitation
90.60 ISO/TC 67/SC 2
Petroleum, petrochemical and natural gas industries — Prevention of corrosion on pipeline systems influenced by stray currents
60.60 ISO/TC 67/SC 2
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and offshore pipelines pig traps design requirements
50.00 ISO/TC 67/SC 2
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification
60.60 ISO/TC 67/SC 2
Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction
90.93 ISO/TC 58/SC 3
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends
60.60 ISO/TC 67/SC 2
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings
60.60 ISO/TC 67/SC 2
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification
95.99 ISO/TC 45/SC 1
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification
60.60 ISO/TC 45/SC 1
Petroleum and natural gas industries — Installation and equipment for liquefied natural gas — Ship-to-shore interface and port operations
90.93 ISO/TC 67/SC 9

No matching records found. Please try changing the filter settings.