Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series

Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series — Addendum 1: Diameters 200 mm and 225 mm

Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)

Withdrawal of ISO/R 330-1963

Moulded fittings in unplasticized polyvinyl chloride (PVC) for use under pressure — Oven test

Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications

Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series

Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series

Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Dimensions of sockets — Metric series

Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Dimensions of sockets — Metric series

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system

Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test

Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test

Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test

Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement

Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement

Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement

Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement

Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method

Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes

Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification

Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings

Polypropylene (PP) pipes and fittings — Density — Determination and specification

Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density

Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness

Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure

Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index

Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength

Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment

Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1

Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system

Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series

Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density

Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method

Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions

Polyethylene (PE) pipes and fittings — Determination of melt flow rate

Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes

Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria

Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) — Chemical resistance with respect to fluids

Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure — Dimensions of laying lengths — Metric series

Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials

Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials

Polypropylene (PP) fittings for pipes under pressure — Sockets for fusion using heated tools — Metric series — Dimensions of sockets

Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings — Nominal diameters, specified diameters and standard lengths

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals

Polypropylene (PP) pipes and fittings — Chemical resistance with respect to fluids

Low density polyethylene pipes and fittings — Chemical resistance with respect to fluids

Unplasticized polyvinyl chloride pipes and fittings — Chemical resistance with respect to fluids

High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed

Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravimetric method

Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the leaktightness of the wall under short-term internal pressure

Plastics pipes and fittings — Opacity — Test method

Plastics pipes and fittings — Determination of opacity

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)

Thermoplastics pipes and fittings — Water absorption — Part 1: General test method

Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings

Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints — Amendment 1

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints

Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints

Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints — Amendment 1

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints

High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications

Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)

Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)

PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure — Design lengths and size of threads — Metric series

Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes

Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Plastics pipes and fittings — Combined chemical-resistance classification table

Plastics pipes and fittings for industrial applications — Collection of data on combined chemical-resistance

Thermoplastics pipes and fittings for hot and cold water systems

Plastics piping systems for hot and cold water installations — Guidance for classification and design

Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use

Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 3: Fittings

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the inside of a section in a deflected condition

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes

Plastics piping systems for renovation of underground water supply networks — Part 1: General

Plastics piping systems for renovation of underground water supply networks — Part 1: General

Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes

Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes

Plastics piping systems for renovation of underground water supply networks — Part 11: Lining with inserted hoses

Plastics piping systems for renovation of underground gas supply networks — Part 1: General

Plastics piping systems for renovation of underground gas supply networks — Part 1: General

Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes

Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes

Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 1: Polyethylene (PE) material

Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material

Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material

Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds

Fusion compatibility of polyethylene (PE) pipes and fittings

Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method

Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient

Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations

Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C

Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C

Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles

Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds

Plastics pipes and fittings — Automatic recognition systems for electrofusion joints

Plastics pipes and fittings — Automatic recognition systems for electrofusion

Plastics pipes and fittings — Automatic recognition systems for electrofusion joints — Technical Corrigendum 1

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance

Thermoplastics pipes and fittings — Nominal ring stiffnesses

Thermoplastics fittings — Determination of ring stiffness

Thermoplastics fittings — Determination of ring stiffness

Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure — Amendment 1

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 1: General

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 2

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 3: Fittings

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications

Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests

Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests

Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering

Plastics pipes and fittings — Definitions of types of test

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 1: General

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 3: Fittings

Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems

Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems — Technical Corrigendum 1

Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems

Plastics piping systems — Multilayer pipe systems for indoor gas installations — Part 2: Code of pratice

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications

Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers

Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems

Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems

Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)

Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method

Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method

Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints

Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling

Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings

Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings

Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings — Amendment 1

Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and systems

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B

Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B

Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction

Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1

Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 2

Plastics pipes and fittings — Definition and construction procedures for reference lines