International Standard
ISO 4190-2:2001
Lift (US: Elevator) installation — Part 2: Class IV lifts
Reference number
ISO 4190-2:2001
Edition 2
2001-02
International Standard
Read sample
ISO 4190-2:2001
34071
Published (Edition 2, 2001)
This standard was last reviewed and confirmed in 2019. Therefore this version remains current.

ISO 4190-2:2001

ISO 4190-2:2001
34071
Language
Format
CHF 129
Convert Swiss francs (CHF) to your currency

Abstract

This part of ISO 4190 specifies the necessary dimensions to permit the installation of Class IV lifts, as defined in

3.2.4, generally used for the transport of goods (freight).

It deals with electric and hydraulic lifts. The horizontal dimensions of the wells (US: hoistways) are generally defined

by the entrance and drive configurations. It covers lifts with either horizontal or vertical power-operated sliding doors

[see Figures 1 a) and 1 b)].

For other characteristics, the manufacturers should be consulted.

This part of ISO 4190 is applicable to new lift installations, with a car with one or two entrances, to be installed in a

new building. Where relevant, it may be used as a basis for an installation in an existing building.

Two types of loading (load per unit area) are addressed:

Series A: passenger and goods (freight) lifts with loading conforming to EN 81-1 or EN 81-2;

Series B: lifts for goods (freight) only, which have a different floor loading in countries which allow this by virtue of

their safety codes.

General information

  •  : Published
     : 2001-02
    : Close of review [90.60]
  •  : 2
     : 19
  • ISO/TC 178
    91.140.90 
  • RSS updates

Got a question?

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)